3D AutoCAD to PDMS Converter

3D AutoCAD to PDMS Converter is the tool that serves to convert 3D models from AutoCAD software into the PDMS software.

There are several ways to convert from 3D AutoCAD to 3D PDMS, can use software by AVEVA also, MEI (Mechanical Equipment Interface) please refer  Import STP ( STEP – File) into Pdms.

3D AutoCAD to PDMS Converter can convert from 3D solid AutoCAD into Extrusion Primitive PDMS.

Panduan untuk install trial version : http://www.pdmsid.com/get-the-trial-version-of-3d-autocad-to-pdms-converter/

Here’s how to use 3D AutoCAD to PDMS Converter :

1. Download macros on the download button below, extract the zip file and save the file 3dCAD2PDMS.VLX, please click How To Download  How To Download as support for downloading files.

2. Open the AutoCAD program and open 3D DWG files to be converted to 3D PDMS.

3. Drag and drop files 3dCAD2PDMS.VLX on the command line. By typing commands 3DTOPDMS in AutoCAD it will show a menu of 3D AutoCAD to PDMS Converter.

3D AutoCAD to PDMS Converter

4. Select the Output File locations which there is a location of PDMS macro result file.

5. Select the conversion quality, High or Low.

6. Click the Convert button to start conversion from 3D solid AutoCAD to a PDMS macro file.

7. Open the PDMS program, and place the CE in ZONE or member of ZONE.

8. Drag & drop files macro conversion results into the PDMS command line, or by typing the command $M /LokasiFile.

Here’s an example of the 3D AutoCAD to PDMS result :

3D Solid AutoCAD to PDMS Converter Result pdms-macro-convert-3d-autocad-into-3d-pdms-pdms


Please go to the page ( PDMS macro download ) to get AVEVA PDMS Macro and others PDMS tools in order to optimize your PDMS jobs.

Please write your request in the comments on the page Request to request of PDMS macro or PDMS tutorial.

Enter the discount code 40PERSEN to get 40% discount.

Licenses can only be run on one device and license duration is unlimited.

Download For Trial Version

Download Trial Version

Generate ID and email to admin@pdmsid.com to try this macro.

43 thoughts on “3D AutoCAD to PDMS Converter”

  1. Very interesting tools, way to convert 3d solid autocad into pdms beside MEI from aveva

  2. Hi, do you have tool to convert Microstation (DGN) file into PDMS? I notice you already had AutoCAD converter to PDMS so I assume you already had the tool for Microstation (DGN). Please let me know.

    1. Just use AutoCAD to convert Microstation DGN format to Autocad DWG. Try the commands DGNIMPORT.
      AutoCAD 2009(or higher version) supports reading DGN file (DGN v8 or DGN v7), and 3d are accepted.
      Can convert into SAT file and import to Autocad DWG (3D Solid).
      And can convert DGN (SAT) to PDMS using Autocad and this tools.

  3. I not have the file “KEY.txt” Where can I dowland it ? Whitout this file I can´t use it

    1. Langsung drag saja ke workspace autocad dan selanjutnya gunakan perintah 3DTOPDMS untuk membuka menu.

      1. sya sudah coba tapi, saat sya convert keluar command
        ; error : bad argument type : stringp nil

        mohon pencerahannya admin..kenapa?..

  4. The trial version doesn’t run, could you provide a Key.txt in order to run the trial?

  5. Hi,

    I received all the necessary data, but no activation was done (I do not have a license and I can not activate it).
    What is another possible way?
    Thank you in advance for your answer.

      1. I have already done this. the problem is with the activation and license file. This procedure does not work.

  6. Hi,

    I tried the procedure mentioned on the tool page, but the file is not getting created. What am I missing, can you please help me with this.

  7. please help, when i convert it out like this
    ; error: bad argument type: stringp nil
    what’s the problem?..

  8. hi.when i run the macro in autocad. there ise eror : no trial
    what should i do?
    which version of autocad and pdms are suitable for macro?

  9. hi.when i run the macro in autocad. there ise eror : no trial
    what should i do?
    which version of autocad and pdms are suitable for macro?

  10. Can you send me the trial license file… i sent you an email already.

  11. Hi there

    I have purchased this macro from the website and yet to receive this could you advise ?
    It has been almost a month and no product delivered to me.

    Best regards
    Alex Jones

  12. This trial version not meaning, please share for everybody, thanks for advance!

  13. I not have the file “KEY.txt” Where can I dowland it ? Whitout this file I can´t use it

  14. Iinstalled your program, but it doesn’t create an output file.
    Ineed your solution.
    Ihope you reply.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *